top of page
M7986P PCBA

The M7986P is an cost effective yet powerful WiFi6 2.4/5GHz 2x2 PCBA based on Mediatek MT7986 ARM Quad core A53 SoC and MT7976C 2x2 RF front end radio. ​

The M7986P supports 2xGbE Ethernet ports, 1 x USBA for firmware upgrade, 1 x reset button and 1 x USB C port for 5V/3A power in and console simutaneously. 

Features

  • Wi-Fi 6 IEEE 802.11a/b/g/n/ac/ax 2.4/5GHz dual band dual concurrent applications

  • Supports MIMO 2x2(2.4GHz) and 2x2(5GHz) WiFi operations

  • Supports WiFi PHY rate of 57.4Mbps for 2.4Ghz(40MHz) and 2,402Mbps for 5GHz(160MHz)

  • SoC: MTK Filogic830 MT7986A Quad Core A53 1.8Hz CPU

  • RF IC: MT7976CN, 802.11ax WiFi6 2.4/5GHz 2x2 radios

  • Memory: 2MB NOR + 8GB EMMC + 2GB DDR4 with optional NAND and NOR reserved and can be customized per request

  • Integrated ESP32-H2 Bluetooth/Zigbee/Thread/802.15.4 SoC

  • Ethernet Interface : 2 x 1Gbps Ethernet ports

  • Interfaces: 1xUSB A, 1 x USB C, 1 x reset button, 3 x ipex connectors (2xWiFi and 1 x Bluetooth)

  • Dimension: 90 x 70 mm

System

  • CPU: Mediatak MT7986A Quad ARM A53 1.8GHz SoC

  • Memory: 

    • DDR3/4: 1GB (up to 4GB)

    • EMMC: default 8GB, up to 16GB

    • NOR: 1MB

    • NAND: (reserved, EMMC and NAND flash share same SPI pinouts)

WLAN

  • Standard: IEEE802.11a/b/g/n/ac/ax WiFi6

  • Bandwidth: 2.4GHz 4x4 40MHz+ 5GHz 4x4 160MHz 802.11ax Wi-Fi6

  • Frequency: 2412 MHz ~2472MHz, 5180 MHz ~5825MHz

  • MIMO: 2.4GHz 4x4+ 5GHz 4x4

  • Transmit power

    • 2.4GHz: Max. 21dBm/MCS0

    • 5GHz: Max. 21dBm/MCS0

  • Sensitivity: -96dBm ~ -52 dBm ​

  • Channel size: 20/40/80/160 MHz

  • Modulation: BPSK, QPSK, 64/256/1024 QAM

  • Data rate

    • 2.4G Rate: HE0-HE11 (8 Mbps – 573.3 Mbps)

    • 5G Rate : HE0-HE11 (8 Mbps – 1200 Mbps)

  • Security: AES-CCMP, GCMP hardware processing​

MISC

  • Power consumption: Typical 13W, Max. 18W with full Tx​

  • Operating temperature: -0°C ~ +70°C

  • Storage temperature: -40°C  ~ +90°C

  • Operating humidity: 5%-95%(Non-condensing)

  • Dimension: 90 X 70 X 3.0mm

  • Antenna connector: 2 x WiFi 2.4/5GHz, and 1 x 2.4GHz BT ipex connectors

  • Power supply: +5V/3A USB C in

  • Interfaces: 

    • 2 x Gbps Ethernet ports

    • 1 x USB3.0 type A 

    • 1 x USB3.0 type C for power in and console

    • 1 x reset button

  • Software: ​

    • OpenWRT 23.05 support with Linux kernel v5.15; or

    • Debian 11.8 Bullseye with Linux kernel v5.15​​​​

bottom of page